Security. Safety. Simplicity.
The 3 foundations of the Aeotec Garage Door Controller.
Easily make your garage door a part of your Z-Wave enabled home.
Monitor and control your garage door via a smart phone and an Internet connected Z-Wave hub from anywhere in the world.
Garage Door Controller comes with everything you need for easy DIY installation: the controller, a tilt sensor, and accessories.
The included tilt sensor lets you receive notifications when your garage door is opened... and shouldn’t be.
Keep a time log of when the garage door has been opened or closed, and receive remote notification when that happens.
Z-Wave Plus inside.
Garage Door Controller is powered by Z-Wave Plus, Aeotec’s Gen5 technology and acts as a Z-Wave repeater.
Automatically set security cameras connected to your Z-Wave system to record when your door is opened or closed.
The smart motor controller is 1 of the 2 parts that makes Garage Door Controller so powerful.
Control your garage door from a smartphone or Z-Wave controller.
Control manually via the smart controller’s central push button.
Includes a 105dB siren and LED lighting to warn of door closures.
Upload MP3 tones.
Customise the controller’s safety tone by uploading an MP3 file.
Connects to your garage door’s existing motor via two wires.
Smart tilt sensor.
Garage Door Controller doesn’t just allow you to control your garage door, it also allows you to check it. Whether used via the motor or manually, the included wireless smart tilt sensor detects if the garage door is opened or closed, and can notify you when that happens and shouldn’t.
Wirelessly reports on your garage door’s open or closed status.
Simple installation with screws/double sided tape.
Cable free and powered by batteries that’ll last up to 2 years.
The smart controller has been designed to work with tilt sensor.
The small (76mm x 25mm) tilt sensor is perfect for most doors.
Secure garage door.
Your garage door is an entry to your home and to your valuables. It needs to be secured.
While some garage door motors are easily overridden or wirelessly hacked, Aeotec’s Garage Door Controller has been hardened to prevent such security issues.
128 bit encryption.
Powered by Aeotec’s Gen5 technology, Garage Door Controller uses encrypted wireless signals to communicate with a Z-Wave network. Gen5 uses the same level of encryption as banks; AES 128-bit.
Z-Wave Plus secure wireless.
The wireless technology used defines how susceptible a device is to attack. Garage Door Controller uses secure Z-Wave Plus, and avoids WiFi and open communication frequencies commonly used by criminals.
Safe garage door.
Garage Door Controller doesn’t just keep your garage safe from intruders, it keeps your loved ones and property safe from the garage door itself. Garage Door Controller meets all the regulations of UL325, the safety standard that defines how garage door motors should operate.
Garage Door Controller also never overrides the basic safety functions that your garage door already offers.
Garage Door Controller indicates when your garage door is about to open or close with visual warnings. Inbuilt within its push button are 8 different LEDs that’ll flash for X seconds before your garage door or gate moves.
In the event that the visual warnings are missed or can’t be seen, Garage Door Controller also offers a speaker system rated to 105dB. Preloaded with tones, and with the ability to upload your own custom MP3 sound file.
Simple to install.
Security. Safety. Simplicity. The 3 foundations for Garage Door Controller.
Despite just how powerful it is, Garage Door Controller is easy to install. The main controller connects to your garage door’s motor in minutes using the provided connection cables;
1. Screw the back mount plate in place.
2. Connect to existing motor via two cables.
3. Lock to back mount plate by twisting.
And the tilt sensor connects to your garage door just as fast;
1. Remove battery tab to power on.
2. Affix mount plate by screws/tape.
3. Lock tilt sensor to mount plate by pressing.
Everything you need is included.
Garage Door Controller ships with everything you need to make your existing garage or gate controller a part of your Z-Wave connected-home.
From the cables you need to connect it to a motor, to the USB cable you can use to optionally change its MP3 tones, Garage Door Controller is the complete package.
The finer details
- RF Protocol: Z-Wave Plus™.
- RF Frequency: 921.42Mhz ‐ AU/NZ approved RF for Z‐wave.
- Wireless Range: Up to 30m without obstacles.
- Updates: Supports over-the-air firmware updates.
- Controller Power: 5V DC Adapter for Garage Door Controller.
- Tilt Sensor Power: CR2 Lithium battery 3V, 800mA.
- Max. Alarm Power: 2W.
- Max. Standby Power: 1W.
- Application: Indoor use only.
- Operation temperature: 0 ~ 40 °C.
- Max. Volume: 105dB.
- Supported Audio Formats: MP3 or WAV.
|Name||Aeotec Z-Wave Garage Door Controller|
|Product Manual||Aeotec Z-Wave Garage Door Controller Product Manual|
|Warranty||12 Months (+ Free 12 month extended warranty)|
Value Quality PerformanceRichardon 11/08/2017Nice compact unit, easy to attach to my existing door controller. Added into my network without major issues (Vera Edge). Now can open/close the garage door remotely (even when overseas) and - more importantly - get alerts if the door is open for too long, avoiding the issue of the garage door being left open accidentally and of course if it is left open I can easily close it without having to drive home.
Value Quality PerformanceGrahamon 30/09/2016Finally! A good garage door controller has been sorely missing from the z-wave range in Australia. Easy install, works perfectly, love that i can upload my own mp3 files (hangar doors are closing, stand clear!)