Make all your lights smart lights.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That's always on when you need it, and off when you don’t. But achieving perfect smart lighting has not always been easy...
Until now. Nano Switch offers smart, Z-Wave connected lighting without any of the hassle.
- Easily add intelligent Z-Wave wireless control to an existing light switch.
- Built-in power meter monitors energy consumption.
- Includes in-built surge and overload protection.
- Super small (43.5 x 39 x 19.5 mm); easily fits behind your existing wall switch.
- Compatible with 2-state (latching), momentary push button or 2 / 3 - way switches.
- Gen. 5 Z-Wave Plus certified for increased performance and reliability.
Easy to install.
Add Nano Switch to your Z-Wave system. It will make your lights smarter. It makes them responsive. It gives you the ability to control them, schedule them and make your lights truly smart.
All of this control and intelligence simply comes from having an electrician wire the Nano Switch behind your existing light switch.... in minutes.
Works with virtually any switch.
Nano Switch has been designed to enhance your home, not to completely change it.
That is why it is been designed to work with most of the light switches typically found in homes, new or old. It installs invisibly behind them, enhancing their functionality instead of completely replacing it.
To make an in-wall lighting controller this perfect means working from the ground up. But despite now being 60% smaller than the original technology, every single millimetre of Nano Switch benefits from Aeotec's 10 year’s experience. That decade’s worth of expertise makes Nano Switch compact without compromise.
43.5mm x 39mm x 19.5 mm
Your lighting may be perfect, but that doesn’t mean the electricity powering it is. Things happen. Surges happen and are common, and Nano Switch protects against them.
With a in-built surge and overload protector, Nano Switch not only keeps your lighting connected it keeps them protected.
Nano Switch dramatically improves the lighting in your home. Aeotec's 3rd generation of invisible lighting controller outperforms all that has come before it.
Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality Aeotec were able to craft inside...
Designed to fit behind a wall switch without compromising on safety, Nano Switch measures a slender 4.2cm x 4cm x 2.5cm.
Without using any more energy, Nano Switch offers greater wireless reliability than all before it. Its wireless signal is now +2.5dBM more powerful so that Nano Switch can offer a 50% greater wireless range that’s up 150 metres.
Your lighting should be responsive. Nano Switch responds in milliseconds - 250% quicker than previous models.
Because of the high amps it carries and to avoid issues such as stray voltage Nano Switch only works with switches and outlets that utilise a neutral wire. Nano Dimmer is an alternative that works with or without a neutral wire.
It’s quicker to install and it’s also easier to wire. Now 60% smaller than previous in-wall switches, Nano Switch fits into even tighter spaces. It also connects to wires 25% thicker than past models.
Low voltage too.
Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.
See your spend.
It powers automation and scheduling - and it also monitors energy consumption. Super-accurate energy metering technology records electricity use with 99% accuracy.
The power of Z-Wave means that Nano Switch can be intelligently automated. It can also be scheduled to switch on and off on a timer... even if your Z-Wave gateway is down.
DIN rail compatible.
Want to use it with a DIN rail? Pair Nano Switch with a generic DIN housing or module box for DIN rail compatibility and you’ll be able to use it with DIN rail systems.
Nano Switch is built upon Aeotec’s leading Gen5 technology and is powered by the latest version of Z-Wave — Z-Wave Plus.
Technology changes and Nano Switch changes with it. Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus so that it remains at the cutting edge.
Because it’s built upon Z-Wave Gen5, Nano Switch features banking grade, AES-128 bit encryption to protect the Z-Wave wireless communication.
|Name||Aeotec Z-Wave Nano Switch|
|Product Manual||Aeotec Z-Wave Nano Switch Product Manual|
|Warranty||12 Months (+ Free 12 month extended warranty)|
Value Quality PerformanceDavid Rawsthorneon 19/09/2018I purchased a few of the zwave nano items, and this single switch it brilliant. Sure you have to run a neutral down if you want to put it behind the switch, but that's usually not a huge issue for an electrician to do that during the installation. 2 switch inputs that can be separately set up is a great idea, as I used this in my bathroom - turn the switch for the light on and the nano switch turns on the fan (Which turns off after 10 minutes thanks to Home Assistant). Don't want the light, then press the push button for the fan and the fan turns on for 10 minutes, or press again and the fan turns off.
I plan on a few more of these items where I already have dimming light globes, or I just want on/off control of the lighting both locally and for the home assistant setup.
Value Quality PerformanceBennyon 24/09/2017Nearly all of my z-wave modules are fibaro... gave this a go as it is cheaper. Works as well as fibaro, although with not as many configuration parameters available - not a big deal as it is a basic on/off module. Will give the nano dimmer a go too.