The sleek and discrete INSTEON Dimmer Module makes adding customisable, fully dimmable remote control to your lamps as easy as plug-and-play.
It's home automation at its simplest and most convenient.
How it works
Plug the module into any standard power outlet and then plug a lamp or other light fitting (up to 300W) into the module.
Using the set button, pair the module to your INSTEON controller or scene and you're done...it’s that easy!
Featuring 32 brightness levels (256 levels via the free INSTEON for Hub app), you can easily set the perfect lighting mood for any occasion.
Add a touch-of-class by adjusting the ramp-rate (how quickly your lamp turns on or off) between 0.1 to 5 seconds (0.1 seconds to 8 minutes with app).
Plug a power-board or double-adapter into the INSTEON Plug-in Dimmer and you can then control multiple lamps and light fixtures – up to 300W.
Setup is a breeze. True plug-and-play simplicity means you can add INSTEON dimmable control to any plug-in lamp or light fixture in a matter of seconds.
As well as brilliant INSTEON control, you can also manually turn your lamp on/off or dim/brighten using the convenient toggle button located on the side of the module.
INSTEON’s unique dual-mesh technology uses both existing power-lines and wireless radio frequency signals to communicate for best-in-class reliability.
Control from other INSTEON devices.
This small yet versatile INSTEON Mini Remote fits in the palm of your hand and controls up to four individual INSTEON enabled devices or scenes. Raise and lower light levels for multiple lights or turn appliances on/off from anywhere in your home.
Trigger INSTEON responders or scenes through detection of movement and/or light levels. Walk into a room and the light will come on - Leave a room and the light will turn off. Adjustable settings including motion sensitivity and auto-off delay.
The clever Open/Close Sensor wirelessly controls INSTEON enabled lights, appliances or scenes throughout your home, it is activated when things… well… open and close. It is even smart enough to turn your lights off for you when you leave a room.
Control from your smart devices.
Apple. Android. Windows.
Add the INSTEON Hub to your home and you can control your plug-in lamps from anywhere.
|Name||INSTEON Plug-In Dimmer|
|Product Manual||INSTEON Plug-in Dimmer (IN2632-522) Product Manual|
|Warranty||24 Months (+ Free 12 month extended warranty)|
|Product Name:||INSTEON Plug-In Dimmer|
|Regions:||Australia and New Zealand|
|In the box:||INSTEON Plug-In Dimmer|
|INSTEON Powerline Mesh Repeater:||Yes|
|INSTEON RF Mesh Repeater:||Yes|
|Load brightness levels:||32 locally (256 with software)|
|Status LED:||Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)|
|LED brightness:||Adjustable from off to 100% bright|
|Local on-level:||Adjustable from 32 fixed brightness levels or resume dim|
|Local ramp rate:||Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)|
|Beep on button press:||Beeps red to indicate traffic (must be enabled via software)|
|Commands supported as controller:||On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim|
|Commands supported as responder:||On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim, Incremental brighten / Incremental dim, Beep|
|RF range:||Up to 50 meters feet open air|
|Phase detect beacon:||Yes|
|X10 addresses:||Any 1 of 256 (unassigned by default)|
|INSTEON device category:||0x01 dimmable lighting control|
|INSTEON device subcategory:||AUS / NZ (921.0 Mhz), 0x12|
|Mounting:||Standard AC power outlet||Casing:||UV stabalized plastic (INSTEON White)||Set button:||Yes||Beeper:||Yes||Beep on button press:||Optional (off by default)||LED:||1 RGB|
|Dimensions:||43mm W x 108mm H x 35mm D|
|Weight:||130g ± 10g|
|Operating Conditions:||Indoors, 0° C to 40° C, up to 90% relative humidity|
|Voltage:||100VAC to 240VAC (± 10%)|
|Frequency:||50/60Hz auto-detected at power-up|
|Max. load:||300 W at 240VAC|
|Load types:||Lighting: Incandescent, dimmable LED, dimmable CFL, dimmable halogen|
|User replaceable fuse:||Yes|
|Retain all settings without power:||Yes, saved in non-volatile EEPROM|
|Standby power consumption:||<0.75W|
|Safety approved:||Approved for use in Australia and New Zealand|
|Certifications:||AS/NZS 4268, CISPR 22, IEC 60669-2-1|
Value Quality PerformanceHenryon 30/08/2015I purchased this with the insteon mini remote to control a lamp that was hard to reach. Works great and took about 10 minutes to setup.
Value Quality PerformanceHamishon 30/10/2014Does exactly what it says on the box - and does it well. I now have 5 of these dimmer modules throughout my home and they all work perfectly every time. Happy customer, highly recommended.