HDMI Over Ethernet AV Sender

If a wireless HD video sender isn't suited to your situation then there is another solution from SmartHome.com.au: our wired HD AV sender.

How It Works

Using a single RJ45 (UTP/Cat5/Cat6/CatX) our HDMI Over Ethernet solution will broadcast your AV signal across your house or office to another TV, projector or computer. And it'll do it all in HD courtesy of the HDMI input/output.

Plugging It In

1. Connect your HD AV source (such as a Blu-Ray DVD player, computer, set top box, or your Pay TV such as Foxtel) to the AV Transmitter via a HDMI Cable
2. Connect to the Transmitters and Receiver together via a single CAT5e/CAT6 cable up to 60m in length.
3. Connect the AV Receiver, via a HDMI cable, to your receiving source be that a TV, computer, or projector.

Why It's Better

This is a world-first patented solution. Other solutions require two RJ45 signals; not this one. Why is that important you may ask? Existing HDMI over STP/UTP extender solutions require two CAT5e/CAT6 cables, one of which must be a shielded cable for video signals. These products use the second cable for the HDCP signals, and quality degradation (in fact, complete signal loss) results.

What's Included

• Blu-Wire R1 Single-port HDMI Receiver
• Blu-Wire T1 Single-port HDMI Transmitter
• 2v DC Power Supply
• 12 Month Warranty

Technical Specifications

• Fully HDCP compliant: don't get stung by wasting your money on a competing HDMI Over Ethernet product that doesn't fully support High-bandwidth Digital Content Protection - your transmission won't work!
• Supports Cat5e/Cat6 UTP cable
• Supports 1080p to 45 metres
• Supports 1080i and 720p to 60 metres
• Supports WUXGA to 45 metres
• Support Display: HDCP 1.1 and HDMI 1.3
• Supported Source: HDCP 1.1 and HDMI 1.2
• Supported Colour depth: 24bit or 32 bit Deep colour (HDMI 1.3 only). Will perform 32 bit to 24bit conversion
• Also known as Blu-Wire by Obonok