X10 & A10 Signal Test Transmitter

The AT001 is an advanced A10 based signal transmitter, which continuously transmits X10 signals. The AT001 is used by installers when commissioning the installation and is normally used in conjunction with AT004 test receiver.

The signal output is selectable, from A10 (6V peak to peak) or X10 (3V peak to peak), using a selector switch inside the cover on the AT001. A second switch selects whether the command sent contains actual commands or not - which allows for signal verification using an oscilloscope without turning home control receivers on or off (thus causing no disruption to occupants).