X10 Motion Sensor - 3 Pack

• Three-pack of the Hawkeye RF X10 Motion Sensor
• 30 metre range
• Tdjustable timer delay of up to 256 minutes On or Off
• Suitable for indoors and outdoors: can be mounted under eaves or other sheltered locations
• Dusk/Dawn sensor can advise your X10 home automation system when dawn/dusk is detected
• Can trigger moods and sequences when used in conjunction with programmable interfaces
• Save money by automatically turning lights off

The Hawkeye X10 motion sensor is a tiny wireless motion sensor that can be attached to the wall with screws or double-sided tape. When motion is detected the unit transmits wireless RF signals to an home control RF Interface module such as the TM13 or V572AE. The interface in turn transmits an X10 home control signal to your home control receivers, turning on lights or triggering sequences.

After the motion stops (you can choose an additional delay) the MS13 sends an off signal and the light or appliance will then turn off. This duration can be programmed up to 256 minutes. A built–in light sensor gives you the option to only detect motion and turn on your lights when it is dark.

In conjunction with a programmable interface, you can program sequences triggered by the MS13 motion detector. For instance, you could have a sequence illuminating the pathway to the bathroom at 15% dim level, for those dark trips in the middle of the night. The lights will turn off after gone back to bed.