X10Pro Appliance Module (wall switch)

From our X10Pro range of home automation technology comes this X10Pro Appliance Wall Switch receiver. Designed to be wired into your house, optionally replacing existing swithces, it is ideal for controlling lights and appliances. With an in-built RF receiver (similar in function to the TM13) it can both issue and receive and issue home automation commands such as On/Off, All Lights On/Off, amd All Units Off

Features

• Control of lighting, including classic, low-voltage, energy-saving, and halogen lamps
• Control of appliances, motors, and pumps
• Receives commands from remote controls (e.g. KR21) and computerised automation (e.g. CM15) due to its secure, in-built wireless receiver (RF)
• In built power-lince communication (PLC); both input and output
• Two-way X10 communication
• Green and red status LEDs
• Momentary switch

Technical Specifications

• 32 X10 inputs or 16 secure X10Pro inputs, 1 output
• Classic lighting circuit: maximum 2000 watts
• Halogen lights: maximum 500 watts
• Low-voltage lighting: maximum 400 watts
• Motors: maximum 3A
• Output power: maximum 10Amp
• Can be reprogrammed without rewiring
• Power Supply: live 240V, 50Hz - 20mA
• RF: up to 30 metres, 433 MHz
• AUF/ALF/ALN
• Designed in France

Installation
The X10Pro Wireless Wall Switch is a wall affixed device with the installation akin to that of a normal switch. It is preferable to install it in a 65mm flush mounted wall box, and it is required that it has a minimum depth of 40mm.

Compatability
As a part of our X10Pro range, the X10Pro Wireless Wall Switch is compatible with the following home automation technologies:

• X10
• A10
• Xanura