I’ll turn a light on for you.
Easily trigger INSTEON enabled lights, appliances or scenes when motion is detected. Never walk up to a dark porch or fumble through a black hallway again.
Save energy and money by automatically turning off lights when you leave a room.
How it works
Trigger INSTEON enabled lights, appliances or scenes when motion is detected.
After a selectable time of no motion, you can have the motion sensor turn those same lights (or appliances) off.
Adjust the sensitivity of the motion sensor to suit any location. You will be able to fine-tune the motion detection area for exact and precise operation.
Photocell light sensor
Adjustable photocell sensor allows you to set a light-threshold so INSTEON enabled lights will not be activated during the day, even when motion is detected.
Optional dawn/dusk mode
Save energy by ensuring lights are off at dawn and increase security by turning your porch lights on at dusk with Motion Sensor's dusk/dawn feature.
Automatically turn paired INSTEON modules off after motion stops (adjustable anywhere between 30 seconds and 2 hours). Never accidently leave a light on again.
The INSTEON Motion Sensor includes an easy to install, adjustable pivot mounting bracket for precise placement and fine-tuning.
Motion Sensor’s specially coated surface can be painted to blend in with your home décor. Give your motion sensor installation that professional finished look.
Setup is simple. True plug-and-play simplicity means you can add motion control to INSTEON enabled lights, appliances or scenes in a matter of minutes.
The INSTEON Motion Sensor has an amazing wireless range. The strong RF wireless signal even works through walls, floors and ceilings.
INSTEON Motion Sensor’s status LED will double-flash after motion is detected (even if LED is disabled), to let you know it’s time to change the 9V battery.
|Name||INSTEON Motion Sensor|
|Product Manual||INSTEON Motion Sensor (IN2842-522) Product Manual|
|Warranty||24 Months (+ Free 12 month extended warranty)|
|Product Name:||INSTEON Motion Sensor|
|Regions:||Australia and New Zealand|
|In the box:||INSTEON Motion Sensor|
|INSTEON Addresses:||1 hard-coded out of 16,777,216 possible|
|INSTEON Device Category:||0x10|
|INSTEON Device Subcategory:||0x01|
|Frequency RF:||921MHz ISM Band|
|RF Range:||45m +|
|Sensitivity Modes:||High (default) or Normal|
|Motion Detection Range:||Up to 110° arc, 12m|
|Motion Detector Sense Input Type:||PIR and photocell|
|Operating Temperature Range:||Indoor / Outdoor, 0 to 49°C|
|Status LED:||1, Red behind PIR lens, normally off, blinks during setup|
|Setup Memory:||Non-volatile EEPROM|
|Casing:||UV stabalized plastic (INSTEON White)|
|Operating Conditions:||Indoors / Outdoors, 0° C to 48° F, up to 85% relative humidity|
|Dimensions:||57mm W x 83mm H x 50mm D|
|Power:||9VDC battery (included)|
|Battery Life:||6 months min.|
|Certification:||Approved for use in Australia and New Zealand|