Is it getting hot in here?
Want to control your home's thermostat from another room? How about being able to cool (or heat) the house before you leave work, or check the temperature when you're on the road? With the INSTEON Thermostat, you can control your home's temperature whether you're at home or miles away, saving energy (and money) and maximising comfort.
The INSTEON Thermostat also works like a standard thermostat with local control, four automatic modes and 7-day programmable settings -- allowing independent settings for weekdays, weekends and every day.
Easy DIY installation.
How it works
Simply replace your current 24V thermostat with the INSTEON Thermostat.
Works with standard heating/cooling systems, including advanced 2-stage systems.
Do-it-yourself - Easily replace your current standard 24V thermostat with the INSTEON Thermostat.
Large LCD display
INSTEON Thermostat features a large, back-lit LCD display making it easy to see the current temperature.
7-day scheduling - allowing independent temperature settings for weekdays, weekends and every day.
Control INSTEON responders
Thermostat can trigger other INSTEON devices and scenes when the temperature or humidity changes.
Receive INSTEON commands
Thermostat can be triggered by any INSTEON controller including Mini Remote and Motion Sensor.
INSTEON Hub compatible
Combined with the INSTEON Hub you can control your thermostat from your smartphone - home or away.
|Product Manual||INSTEON Thermostat (IN2732-522) Product Manual|
|Warranty||24 Months (+ Free 12 month extended warranty)|
|Product Name:||INSTEON Thermostat|
|Regions:||Australia and New Zealand|
|In the box:||INSTEON Thermostat|
|Powerline Mesh Repeater:||No|
|RF Mesh Repeater:||Yes|
|LED:||Red when Heating is active, green when Cooling is active, Off when when neither mode is active, blinks red or green during setup|
|LED Brightness:||LED can be enabled or disabled locally or via software|
|Commands Supported as Controller:||On / Off|
|Commands Supported as Responder:||On / Off / Beep|
|RF Range:||Up to 50 meters open air|
|Wire Connections:||Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2|
|Screw Clamp Connections:||Yes, 10 position|
|Casing:||UV stabalized plastic (INSTEON White)|
|Beep on Button Press:||Optional (off by default)|
|Operating Conditions:||Indoors, 0° C to 40° F, up to 90% relative humidity|
|Dimensions:||145mm W x 91mm H x 28mm D|
|Supply Voltage:||24VAC (supplied by furnace or air handler)|
|Electrical Supply Frequency:||50/60Hz|
|Retains All Settings Without Power:||Yes, saved in non-volatile EEPROM|
|Standby power consumption:||< 1 watt|
|Certification:||Approved for use in Australia and New Zealand|
Value Quality PerformanceSusanon 15/03/2016I got this to control a heater in my babies room. I concurrently ran it with several other temperature sensors. It NEVERS measures the correct temperature, even after several recalibrations. Also, takes impossibly long to log into with the app on any of my idevices
Value Quality Performancehollyon 29/08/2015this is probably the product we use most with the insteon app. very handy to be able to control the temperature from work or bed. removed our old thermostat and had this up and going in about 40 minutes.
Value Quality PerformanceTran Luon 24/08/2015Didnt know it need INSTEON Hub so I use it with my phone.