Rithum Switch Smart Home Control Panel
Rithum Switch is a beautifully designed smart home control panel that combines your lighting, audio and climate control into one simple touchscreen smart switch. The whole family can easily control the perfect lighting, sound and temperature settings without a smartphone, app or training. Works with Sonos, Philips Hue, Homey Pro & Fibaro Home Center 3.
2 Wire Magnetic Reed Switch
Reed switches are used to monitor the opening and closing of windows or doors (or essentially anything that opens or closes). There are two parts to a reed switch... one has a magnet inside, the other a reed switch (which is triggered when the magnet comes close and deactivates when the magnet is pulled away). When wired (DIY with 2 low voltage wires) to a smart home binary sensor input device, you can easily monitor and create automations for doors and windows. Can be mounted with double-sided tape or screws.
Aeotec Recessor
Recessor for Fibaro Motion Sensor
Use this Recessor to place Fibaro Motion Sensors within a wall or ceiling allowing them to serve their function more discreetly and preserving the aesthetic appeal of your home. It is easy to install and remove. Simply twist the cover off the Recessor and place your Fibaro Motion Sensor inside, then pull the Recessor clips back as you insert it into the hole in your wall/ceiling.
Aeotec Z-Wave Water Sensor 6 Dock
Designed to compliment the Aeotec Z-Wave Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.
Aeotec Z-Wave Plus Range Extender 6
iSmartGate USB to Ethernet Adaptor
USB to Ethernet Adaptor for a wired connection between your iSmartGate device and your home router or access point. Ideal for locations with too many Wi-Fi devices, where the Wi-Fi signal is not reliable or doesn't reach the desired installation location. This accessory connects to the iSmartGate device using the USB port and to an Ethernet cable (RJ45) using the Ethernet port.
Eve MotionBlinds (1ch or 5ch) Remote Control
Netatmo Indoor Module for Weather Station
Additional Indoor Module for the Netatmo Personal Weather Station. Place anywhere in your home to monitor temperature, humidity and CO2 readings. You can connect up to 3 Additional Modules to your Netatmo Weather Station.
Netatmo Rain Gauge
By adding the Rain Gauge to your Netatmo Personal Weather Station you will be able to track the amount of rainfall per hour or over a longer stretch (historical data is stored free). You will also be able to set up notification that will notify you when the sensor registers rainfall.
Netatmo Wind Gauge
Designed to work with the Netatmo Personal Weather Station. The first ultrasound wind gauge of its type: the 4 ultrasonic transducers provide ultra-accurate measurements for wind speed and direction.
Shelly EM Energy Meter 50A or 120A Clamp
Addition energy meter clamps for Shelly EM Energy Meter - available in 50A and 120A ratings.
