IR - RF to X10 Interface

The IR7243RF transmitter lets you interface IR learning remote controls like our 8-in-1 Universal remote or Philips Pronto to your X10 home control system. The desktop unit gives you control of up to eight X10 modules via manual control and up to sixteen by infrared remote control. Alternatively use your remote to trigger sequences and moods and your IR remote can indirectly control up to all 256 X10 addresses.

This unit is similar to the standard IR7243 unit but also features an RF Interface - allowing our RF remote controls and devices (such as our MS13 motion sensor) to communicate to X10 receiver modules.

X10 commands supported by the IR7243 include Dim/Brighten, All Lights On/All Units Off and address On/Off.

How it works:

Simply plug the IR7243 into a standard 240V power point. You'll then have manual or remote control of up to eight X10 home control receivers (such as lamp and appliances modules) and X10 switches.

Technical note:

It is generally not recommended to have more than one RF interface installed in your home on the same house code. Therefore if you already have a TM13, CM15 Computer Interface or other X10 RF interface then please purchase the IRIX35 IR to X10 interface. This is also an X10-Advanced unit, featuring a stronger X10 transmission strength.