homeSYS Z-Wave Push Button Dimmer Mech
Original price was: $99.00.$89.00Current price is: $89.00.
This revolutionary smart push button dimmer mech is a unique Z-Wave device designed to work with a wide range of dimmable light sources (including dimmable LEDs). Easy installed by a licensed electrician in minutes (without the need for a neutral wire at the switch) – it simply snaps right into your existing wall switch (replacing the current switch mech). Compatible with all Clipsal 2000 / Saturn Series, Deta and Trader wall switches. Once installed, you can control and dim the attached lighting through your Z-Wave controller as well as manually from the wall switch.
FREE EXTENDED WARRANTY
SMARTHOME REWARD POINTS
FAST DELIVERY - FREE OVER $199
Smart dimming.
The all-in-one Z-Wave push button dimmer / switch mechanism.
Compatible...
Compatible with Clipsal 2000 / Saturn Series, Deta & Trader wall switch plates, including…
Clipsal 2000 Series
Clipsal Saturn
Clipsal Zen
Clipsal Horizon
How it works...
Your electrician simply replaces your current “dumb” switch mech with the homeSYS Z-Wave Push Button Mech. There is no need to change your wall-switch plate.
Once installed and wired to your lighting, a quick press and release will turn the lights on / off – pressing and holding will also allow dimming / brightening from your wall-switch – as well as smart control via your Z-Wave hub or software.
The finer details
Specifications | |
| Input Voltage: | AC100-240V |
| Maximum Load: | 1.5A - LED 175W |
| Minumum Load: | Combined 15W ~ 20W depending on fixture(s) |
| Neutral Wire: | Works without a neutral wire at the switch |
| Temp. Range: | 0°C to + 40 °C |
| Relative Humidity: | 8% to 80% |
| Dimensions: | 45 x 21 x 21mm |
| Z-Wave Frequency: | 921.42 MHz (ANZ) |
| Switch Compatibility: | Any switch that accepts Clipsal 30 / 60 Series Switch Mechs |
Product Questions & Answers
- Can you fit multiple in a 4 gang Clipsal Saturn Zen faceplate?
- Q Can you fit multiple in a 4 gang Clipsal Saturn Zen faceplate?A No, these are not compatible with Zen.A Yes, you can fit as many push button versions of the HomeSys mechs as you like into a Zen faceplate as they simply replace the standard Clipsal switch mech. How does this work with the Clipsal Saturn Zen since the button face can't be swapped and it's not circular?
- Q How does this work with the Clipsal Saturn Zen since the button face can't be swapped and it's no...... Read moreA They simply replace the Clipsal Zen switch mech - they do not replace the front button (a special button is included to replace the white button you see on the HomeSys Push Button Mech - this makes it compatible with the Zen switch covers). Can the led in the switch be disabled? Can the switch face be swapped out to not include the led hole?
- Q Can the led in the switch be disabled? Can the switch face be swapped out to not include the led ...... Read moreA
No, the LED cannot be turned off nor the face swapped.
Reviews
There are no reviews yet.