The Clipsal Impress Momentary Bell Press Mechanism is the perfect switch for Z-Wave Dimmer modules. A quick press will turn the lights on / off – pressing and holding will also allow dimming / brightening from your Clipsal 2000 Series wall-switch. Available with or without built-in LED light.
The Clipsal Impress Momentary Bell Press Mechanism is the perfect switch for Z-Wave Dimmer modules…
Compatible...
Compatible with Clipsal 2000 Series wall switch plates, including…
Clipsal 2000 Series
Clipsal Classic 2000 Series
Clipsal Slimline SC2000 Series
How it works...
Your electrician simply wires the Momentary Bell Press Mechanism with your Z-Wave Dimmer module – which in turn is installed into your Clipsal 2000 Series switch plate.
Once installed, a quick press and release will turn the lights on / off – pressing and holding will also allow dimming / brightening from your Clipsal 2000 wall-switch – as well as smart Z-Wave control of course.
What it does...
The best of both Worlds…
Now your Z-Wave enabled dimmable lighting can be dimmed either manually from your Clipsal 2000 Series wall switch or your Z-Wave Gateway Controller – in perfect unison.
Manual dimming switch control
Z-Wave wireless smart control
Is this necessary?
Put simply… No (it is completely optional).
Virtually any normal switch mechanism will work with a Z-Wave Dimmer module – for turning your lights on and off. However, if you would also like to be able to dim your lights manually from your Clipsal 2000 Series wall switch, then this “Momentary Bell Press” mechanism is required. Either way, you will always be able to dim your lights via Z-Wave smart control.
Reviews (2)
2 reviews for Clipsal Impress Momentary Bell Press Mech
Jesse (verified owner)–
Rated 1 out of 5
Horribly mushy action when they work properly and two out of the four I bought now seem to get stuck pressed in and are difficult to tell whether they’ve been pressed properly or not. Very poor product, not what you’d expect from Clipsal.
Marcuse (verified owner)–
Rated 5 out of 5
I have 2 of these (no led) for a shelly dimmer. Work well. Fit snug. Momentary buttons hard to find, these are recommended.
AYes, this will require a neutral wire for the LED.
The Clipsal Slimline 2000 series seems to be discontinued. What type of switch units and faceplates would we expect to use now for a similar look, and that will fit the dimmer, etc.?
QThe Clipsal Slimline 2000 series seems to be discontinued. What type of switch units and faceplat......
Read more
A
The Clipsal Iconic range repalces the 2000 series - however they do not yet make a suitable momentary mechanism that is suitable.
Can it be used for a usually on, momentary off circuit?
QCan it be used for a usually on, momentary off circuit?
A
Sorry, no. Only usually off, momentarily on.
How does it dim or brighten with only one button? Is it that it dims down to a point and then begins getting brighter up to max, and then back down again - and so on - if you hold your finger on the button 'permanently'? Or do you press and hold to dim down to 0/off and then release, and re-press to brighten to 100%? Minor questions, but just wondering...ta.
QHow does it dim or brighten with only one button? Is it that it dims down to a point and then beg......
Read more
A
When combined with a smart dimmer module (i.e. Aeotec Nano Dimmer), pressing and releasing will toggle the light on/off. Press and hold will brighten, (release) press and hold again will dim.
Only registered users are eligible to enter questions
$99.00Original price was: $99.00.$60.00Current price is: $60.00.
This revolutionary smart push button dimmer mech is a unique Z-Wave device designed to work with a wide range of dimmable light sources (including dimmable LEDs). Easy installed by a licensed electrician in minutes (without the need for a neutral wire at the switch) - it simply snaps right into your existing wall switch (replacing the current switch mech). Compatible with all Clipsal 2000 / Saturn Series, Deta and Trader wall switches. Once installed, you can control and dim the attached lighting through your Z-Wave controller as well as manually from the wall switch.
$99.00Original price was: $99.00.$65.00Current price is: $65.00.
This revolutionary smart rotary knob dimmer mech is a unique Z-Wave device designed to work with a wide range of dimmable light sources (including dimmable LEDs). Easy installed by a licensed electrician in minutes (without the need for a neutral wire at the switch) - it simply snaps right into your existing wall switch (replacing the current switch mech). Compatible with all Clipsal 2000 Series, Deta and Trader wall switches. Once installed, you can control and dim the attached lighting through your Z-Wave controller as well as manually from the wall switch.
Jesse (verified owner) –
Horribly mushy action when they work properly and two out of the four I bought now seem to get stuck pressed in and are difficult to tell whether they’ve been pressed properly or not. Very poor product, not what you’d expect from Clipsal.
Marcuse (verified owner) –
I have 2 of these (no led) for a shelly dimmer. Work well. Fit snug. Momentary buttons hard to find, these are recommended.