How it works...
Your electrician simply wires the Momentary Bell Press Mechanism with your Z-Wave Dimmer module – which in turn is installed into your Clipsal Saturn switch plate.
Once installed, a quick press and release will turn the lights on / off – pressing and holding will also allow dimming / brightening from your Clipsal Saturn wall-switch – as well as smart Z-Wave control of course.
What it does...
Now your Z-Wave enabled dimmable lighting can be dimmed either manually from your Clipsal 2000 Series wall switch or your Z-Wave Gateway Controller – in perfect unison.
Manual dimming switch control
Z-Wave wireless smart control
Is this necessary?
Virtually any normal switch mechanism will work with a Z-Wave Dimmer module – for turning your lights on and off. However, if you would also like to be able to dim your lights manually from your Clipsal Saturn Series wall switch, then this “Momentary Bell Press” mechanism is required. Either way, you will always be able to dim your lights via Z-Wave smart control.