The finer details
Power | |
| Power supply AC: | 110-230V ±10%, 50/60Hz |
| Power supply DC: | None |
| Maximum load: | 4.1A (5A for short operation) |
| Minumum load: | No neutral wire without bypass - 20W resistive load. No neutral wire with Bypass - no minimum. With neutral wire - no minimum. |
| Device power consumption: | < 1 W |
Special functions | |
| Dry contacts: | No |
| Roller shutter mode: | No |
| Device temperature protection: | Yes |
| Overload protection: | No |
| Power measurement: | No |
| Working without a neutral wire: | Yes |
| Dimmable control: | No |
Supported loads | |
| Capacitive: | Motor starting capacitors, Generators, Synchronous motors |
| Inductive: | Led lights, Transformers, Fans, Motors |
| Resistive: | Lights, Electric heaters |
| Lights: | On / off control of any light(s) within load limits |
Features | |
| Control channels: | 1 On/Off Relay Channel |
| Operational temperature: | 0°C to + 40°C |
| Intelligent On/Off: | Yes |
| Local and smart control: | Yes |
| Sunrise/Sunset timer: | Yes |
| Built-in weekly scheduler: | Yes |
Connectivity | |
| Wi-Fi protocol: | 802.11 b/g/n |
| Radio frequency: | 2400 – 2500 MHz |
| Radio signal power: | 1mW |
| Wireless range: | up to 50 m outdoors and up to 30 m indoors (depending on the building materials) |
Dimensions | |
| Size: | 39mm x 36mm x 17mm |
OPTIONAL ACCESSORIES
Shelly Bypass
A Shelly Bypass is usually required for both the Shelly 1L and Shelly Dimmer 2 where there is no neutral wire at the wall switch and the power consumption of the attached load is less than 20 watts. In some cases, the Shelly Dimmer 2 may also need this Bypass to stop LED lights "flickering" at low dimming levels for LED lighting with a combined wattage of less then 50W.
Reviews
There are no reviews yet.