Shelly PRO Dimmer 0/1-10V PM

SKU: SHELLY-PRO-01DIM Category:

Original price was: $104.99.Current price is: $83.99.

The Shelly Pro Dimmer 0/1-10V PM is a DIN rail smart dimming controller with built-in power monitoring for compatible 0–10V and 1–10V LED drivers. Easily adjust lighting brightness and control your lights remotely through the Shelly app or your home automation system.

Only 8 left in stock

Free Australian shipping on orders over $199

Free 12 Month Extended Warranty included: 2 Years

Purchase now and earn 84 Reward Points.  
Found this product at a lower price?
Description

Professional.

0/1–10V dimming. DIN rail convenience.
Shelly Pro Dimmer 0/1-10V PM DIN rail dimming controller

Bring smart control to compatible LED drivers with the Shelly Pro Dimmer 0/1-10V PM. Adjust brightness, automate your lighting and keep an eye on power use from one DIN rail controller.

Wi-Fi or Ethernet

Connect directly to your network. No Shelly hub required.

0/1–10V control

One dimming channel for compatible 0–10V or 1–10V drivers.

DIN rail mounting

Keep lighting control neatly inside your electrical enclosure.

Power monitoring

View the power and energy used by the connected circuit.

Wall button control

Configure single or dual button dimming.

Schedules and timers

Set lighting routines and automatic on/off timers.

Night mode

Choose a gentler brightness setting for the evening.

Local integration

Connect with Home Assistant or build automations using MQTT.

A wall button used for manual lighting control

Control.

Your lights. Your way.

Keep everyday control at the wall with single or dual button dimming. Set minimum and maximum brightness levels, then fine-tune how quickly your lights fade.

Automate.

Make evenings a little easier.

Schedule your lights around your routine, use automatic on/off timers and set a softer night-time brightness. A reading corner or a relaxed evening on the couch—choose the light that suits.

A couple relaxing in a living room with adjustable lighting
Shelly Pro Dimmer 0/1-10V PM installed alongside other Shelly DIN rail modules

Monitor.

See what your lighting uses.

The built-in meter reports power and energy consumption. Check the connected circuit’s readings alongside its lighting controls, so you can see what changes when you adjust your routine.

Connect.

At home, and away.

Use Shelly Smart Control for app access, or the built-in web interface on your local network. Remote app control requires an internet connection and cloud access.

Home Assistant’s Shelly integration communicates locally, without needing the Shelly cloud. MQTT and scripting provide further options for custom automations.

Shelly Pro Dimmer 0/1-10V PM and other Shelly modules mounted on a DIN rail

The right fit.

This controller needs a compatible driver with a separate 0–10V or 1–10V control input. It is not a direct replacement for a phase-cut dimmer.

Have your electrician check the driver’s control requirements and load before installation. Neutral is required. The 16A rating applies to the relay switching circuit, not the low-voltage dimming signal.

The finer details

Product Shelly Pro Dimmer 0/1-10V PM
Manufacturer model SPCC-001PE10EU
Mounting DIN rail
Dimming channel 1 × 0–10V / 1–10V analogue output
Control type Current sourcing, per Shelly’s product specification
Switch inputs 2; single or dual button dimming
Power supply 110–240V AC; neutral required
Device consumption Less than 3W
Relay switching limits 16A maximum; 240V AC maximum
Metering Voltage, current, power and energy
Connections Ethernet (RJ45), 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 4.2
Automation Schedules, on/off timers, night mode, MQTT, webhooks and scripting
Protection functions Overtemperature, overvoltage, overcurrent and overpower
Dimensions (H × W × D) 94 × 19 × 69mm (±0.5mm)
Weight 70g
Operating temperature −20°C to +40°C
Operating humidity 30–70% RH
Maximum altitude 2,000m
Housing Blue plastic
Terminal torque Maximum 0.4Nm
Conductor size Green connectors: 0.5–2.5mm²; blue connectors: 0.5–1.5mm²
Strip length Green connectors: 6–7mm; blue connectors: 5–6mm
External protection specified by Shelly 16A breaker, B or C characteristic, 6kA interrupting rating, energy limiting class 3

Helpful resources.

Installation must be carried out by a licensed electrician. Follow Shelly’s installation instructions and use suitable external circuit protection.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Shelly PRO Dimmer 0/1-10V PM”

Your email address will not be published. Required fields are marked *

5 × three =

Questions & Answers

Product Questions & Answers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions