-13%
Aeotec Z-Wave Water Sensor 7 Pro Original price was: $89.00.$79.00Current price is: $79.00.
Aeotec Z-Wave Nano Switch Original price was: $99.00.$79.00Current price is: $79.00.
Aeotec Z-Wave TriSensor 8
Original price was: $79.00.$69.00Current price is: $69.00.
Three unique sensors crafted into TriSensor’s compact housing. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. Z-Wave Plus certified. Includes 1 x 3V CR123 lithium battery.
FREE EXTENDED WARRANTY
SmartHome includes an additional 12 Month Extended Warranty on all products. Find out more.
SMARTHOME REWARD POINTS
We reward our valued customers by providing Reward Points on every purchase. Find out more.
FAST DELIVERY - FREE OVER $199
Only $10 shipping within Australia (free over $199). Great rates to New Zealand. Find out more.
Description
3 built-in sensors...
one smarter home.
Three different sensors are crafted into TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment and a light intensity sensor to manage lighting.
Featuring the latest Z-Wave 800 Series chipset.
Motion
Accurate up to 10 meters.
Temperature
-10 ~ 50°C with accuracy of ±1°C
Light
0~30000 LUX with ±3% accuracy.
TriSensor 8...
makes your home smarter.
Every Z-Wave smart home depends on data for truly intelligent automation; automation that makes a smart home actually smart, responsive, and secure. TriSensor provides your smart home with its most essential data.
Lights up your night
TriSensor knows you’re home and when it’s getting dark, it can then automatically brighten smart lighting. Smart rules can be set up via a Z-Wave gateway so that TriSensor brightens rooms gradually and then switches off lights when rooms are no longer used.
Lights your way
Never search for a light switch during the night again. Capable of detecting motion even when it’s completely dark in a room, TriSensor can turn on Z-Wave enabled smart lights, including Nano Switch or those connected to Nano Dimmer.
Lights your cameras
Indoor security cameras suffer from poor quality if recording in low-light. TriSensor fixes that. If motion is detected and you’re not home, they can turn on connected lights so that any security cameras, indoor or out, record enhanced footage.
Controls your comfort
With TriSensor, your room will never be too hot or too cold. It’s ambient temperature sensor monitors a room’s temperature with ±2% accuracy and can automatically adjust heating and cooling systems connected to your Z-Wave hub.
Keeps you informed
Whether you’re using it to power a Z-Wave security system or just to know when your loved-ones are home, TriSensor can be used to trigger the alarm and send immediate notifications to your smartphone when motion is detected and you’re not home.
Family friendly
TriSensor’s motion sensor can distinguish between adults, children and pets – up to 10m away. You can easily calibrate and adjust TriSensor’s sensitivity to make sure your automated Z-Wave scenes only react to the movements you want to detect.
Place it anywhere.
At only 45mm squared and 37mm deep, TriSensor is really small – weighing in at only 50 grams.
This means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities…
Corner mount
Shelf mount
Flush mount
Recessed mount
OPTIONAL ACCESSORIES
Reviews (4)
4 reviews for Aeotec Z-Wave TriSensor 8
Questions & Answers (6)
Product Questions & Answers
- Does this product work with Google Home?
- Q Does this product work with Google Home?A
Not directly - you will need a Z-Wave hub (such as the Aeotec Smart Home Hub) to work with google Home.
What is the battery life of the unit? - Q What is the battery life of the unit?A
Approxamitley 12 - 18 months.
Can these be installed outdoors? Whats the IP rating? - Q Can these be installed outdoors? Whats the IP rating?A
No, this sensor cannot be used outdoors - it is from indoor use only.
What angle range can motion be detected? Is it comparable to the motion only sensor at 120 degrees? - Q What angle range can motion be detected? Is it comparable to the motion only sensor at 120 degrees?A The motion sensing range is 110 degrees. When will you have more stock arriving for the Aeotec Z-wave TriSensor?
- Q When will you have more stock arriving for the Aeotec Z-wave TriSensor?A Stock will be arriving around the 30th of Sept. Can you please confirm when you are expecting to receive more stock of this item?
- Q Can you please confirm when you are expecting to receive more stock of this item?A Not too far away now - will be available early December 2018.
Only registered users are eligible to enter questions
You may also like…
Aeotec Z-Wave MultiSensor 7
The Aeotec Z-Wave MultiSensor 7 can measure motion, humidity, light levels, temperature, vibration and UV all from one very small (and very clever) device. Featuring the latest Z-Wave Gen 7 (700 Series) chipset and firmware – this is the cutting edge of Z-Wave sensor technology. USB cable and 2 x CR123A batteries included.
Aeotec Z-Wave Door Window Sensor 7 Pro
The Aeotec Door/Window Sensor 7 Pro is a Z-Wave Plus (700 Series) device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 Pro also includes universal "dry contact" terminals allowing you to wire in other external sensors.
David –
I recently exchanged these as a replacement for the original Tri Sensor. I am pleased to say this version of the Tri Sensor is performing extremely well. Range is excellent and sensitivity is much improved. There are no issues with previously experienced jamming when triggered multiple times over a short period of time. I have closely monitored these since installing and am very impressed by their stability and responsiveness. Exceptional service from Brad and the team who replaced the original Tri Sensor as soon as this version was made available. Great company to deal with.
Des –
Got one for our garage for when we drive in at night or simply working in there and it’s amazingly sensitive. I’ve got it on a 1 minute timer because it picks up the slightest movement and we’ve never been left in the dark. Add this to a Aeotec Recessor and it’s beautiful.
Stefan –
I’ve integrated this sensor with my Home Assistant server using the OpenZWave add-in (the older built-in ZWave integration wasn’t working for this sensor).
I was initially having issues with this sensor not giving reliable updates, even though it reported it was getting a good signal. After moving the sensor to another location in the same room, performance has been reliable.
I like the ability to alter the sensitivity of the sensor, and the ability to change the LED colours is a bit of fun.
My main criticism is that the documentation is quite vague on how to place the TriSensor. It’s working where I’ve put it but I keep wondering whether I can put it somewhere better if I knew the limits to its scope. (The MultiSensor 6 documentation has diagrams of the range.)
Mitch Taylor –
installed this for a friend, the battery that came with the unit once installed lasted 2 weeks at the most then was constantly getting low battery alerts, brought a new battery for it and would only get a couple of days out of it..
had to change their setup to a spare Fibaro Z-Wave Motion Sensor i had and it has worked flawlessly ever since.